
NSI Industries · Polaris · Copper Compression
L8N-14P
2 Hole Long Barrel Copper Compression Lug with Peep Hole 8 AWG - 1/4" Bolt - 1" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
Contact for Pricing

NSI Industries · NSI · Miniterms
S16-8-P
16-14 AWG Uninsulated Spade Terminal #8 Stud - 100 Count Uninsulated spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Uninsulated spade terminals are made of electro tin-plated copper. 600V, 105 degrees C. FEATURES: STYLE: Uninsulated Spade MATERIAL: Tin-plated copper QUANTITY: 100 Count WIRE SIZE: 16-14 AWG STUD SIZE: 8 LENGTH: 1.000 WIDTH: 0.492
Contact for Pricing
Minimum Qty: 100
Multiplier: 100
*Contact for lower quantities*

Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Polaris EDGE
ISPB600-4
The Polaris ISPB600-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 600 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and is designed for use in a wide range of temporary submersed or burial splicing applications.
Contact for Pricing

NSI Industries · NSI · FireStop
FS-814P
FireStop 814 Residential and Commercial Caulk - 10 Oz. APPLICATIONS: FireStop814 Fire stopping caulk is a single component, non-combustable, non-intumescent material for residential and commercial applications. Colored red for easy inspection, FireStop814 creates an effective barrier against flames, smoke and toxic gases and has superior adhesion and gunnability. FireStop 814 is for use in annular spaces around wires and pipes, in one- and two-hour fire rated assemblies. It restores the integrity of firestops in residential and commercial construction. Meets UL 1479/ ASTM-E814 standards. SIZE: 10 oz. COLOR: Red
Contact for Pricing

NSI Industries · NSI · Miniterms
S16-8V-F-BULK
16-14 AWG, # 8 Stud Vinyl Insulated Flange Spade, 1,000 Per Pack
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · WarriorWrap
WW-732-RD
WarriorWrap WW-732-RD Red Vinyl Professional-Quality Electrical Tape is strong enough for demanding environments and highly resistant to abrasion and corrosion. This tape is 7mil thick, 66ft long and has a max temperature rating of 220 degrees F. The strong adhesion helps stick to uneven surfaces and keeps the backing in place. Top breaking strength and elasticity make WarriorWrap an excellent choice for splicing, insulating or marking wires.
Contact for Pricing

NSI Industries · NSI · Miniterms
S22-10N-BULK
22-18 AWG Nylon Insulated Spade #10 Stud, 1,000 Per Pack
Contact for Pricing
Minimum Qty: 1000
Multiplier: 1000
*Contact for lower quantities*

NSI Industries · NSI
8180-HS
8" UV Black Heat Stabilized Cable Ties are formulated for high temperature situations, such as automotive applications and are engineered for superior performance. 18lb Tensile Strength-100 Count Pack.
Contact for Pricing

NSI Industries · Polaris · Polaris Vision Tap
IPL250-3C
The Polaris IPL250-3C Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 250 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

NSI Industries · Platinum Tools
100029C
The patented ezEX48 connectors feature a unique integrated Hi-Lo stagger load bar and allows big conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A/Cat6 cabling and is recommended for PoE/PoE+ and Data applications.
Contact for Pricing