Showing 61-72 of 83 results
An 8-inch angle brace. It is zinc plated. The sheet identifies it as catalog number AB8EG.
Contact for Pricing
Minimum Qty: 40
Multiplier: 40
*Contact for lower quantities*
A 2-hole adjustable corner angle with a 6-7/8 inch depth. It is made of carbon steel with an electro-galvanized finish. The part measures 1-7/8 inches high, 1-5/8 inches wide, and 1/4 inch thick.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 4 hole 3 way gusset corner angle. It is zinc plated. The sheet identifies it as catalog number CAG4H3WEG.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
This is a 7 hole cross gusset plate. It is zinc plated. The sheet identifies it as catalog number XGP7HEG.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Ufitting splice for 1-5/8 channel. It is zinc plated. The sheet identifies it as a 4-hole splice fitting.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
A 4 hole parallel corner angle with a zinc plated finish. The sheet identifies it as catalog number CAP4HEG. It is a corner angle product used in stud bolt applications.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
A 3-hole 3-way corner angle strut fitting. It is made of carbon steel with an electro-galvanized finish. The part measures 3-1/2 in. long, 2-1/4 in. high, and 1-5/8 in. wide, with a thickness of 1/4 in.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
An angular fitting with 2 holes for strut applications. It is made of carbon steel with an electro-galvanized finish. The part measures 3-1/2" deep, 1-7/8" high, and 1-5/8" wide, with 1/4" thickness and 9/16" holes.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
4 hole tee gusset plate with a zinc plated finish. It is a stud bolt accessory identified on the sheet as catalog number TGP4HEG. The sheet does not print any dimensional specifications for this item.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
A 3-hole cross corner angle from the Strut Fittings line. It is made of carbon steel with an electro-galvanized finish. The part measures 3-7/8 in long, 1-7/8 in high, 1-5/8 in wide, and 1/4 in thick.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 5 hole cross plate with a zinc plated finish. The sheet identifies it as catalog number XP5HEG. It is a stud bolt-related hardware item used as a cross plate.
Contact for Pricing
Minimum Qty: 15
Multiplier: 15
*Contact for lower quantities*
A 3-hole long corner angle strut fitting. It is made of carbon steel with an electro-galvanized finish. The part measures 1-5/8 in. long by 1-5/8 in. wide by 4-1/8 in. high and has a thickness of 1/4 in.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Showing 61-72 of 83 results