Showing 49-60 of 83 results
Post base single channel with 2 holes and a square 3-1/2 size. It is zinc plated. The sheet identifies it as catalog number PBS2H350SQEG.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
A 4 hole splice plate made of steel with an electro-galvanized finish. It is a straight flat plate fitting with 4 mounting holes spaced 9/16 in. on center. The plate thickness is 1/4 in.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 5-hole corner gusset plate with an angular fitting design. It is made of carbon steel with an electro-galvanized finish. The plate measures 5-3/8 in. high by 5-3/8 in. wide and has 5 holes sized 9/16 in. Thickness is 1/4 in.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
A 2 hole swivel plate. It is zinc plated. The sheet does not list any additional dimensional or material specifications.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 4 hole tee plate flat plate fitting for stud bolt applications. It is made of steel with an electro-galvanized finish. The plate is T-shaped, has 4 holes, 9/16 in mounting holes on center, and is 1/4 in thick.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
A 3 hole corner gusset plate with an angular fitting design. It is made of carbon steel with an electro-galvanized finish. The plate measures 3-1/2 in. high by 3-1/2 in. wide and has 3 holes sized 9/16 in. The thickness is 1/4 in.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 3 hole corner plate flat plate fitting. It is made of steel with an electro-galvanized finish and silver color. The plate is L-shaped and has 3 mounting holes with 9/16 in. mounting holes on center and 1/4 in. thickness.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Angular fitting made of carbon steel with an electro-galvanized finish. It measures 8-5/8" wide, 3-3-3/4" high, and 1-7/8" deep. The fitting has 4 holes: 2 at 9/16" and 2 at 9/16" x 1-1/2", with 1/4" thickness.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
A 24-inch angle brace. It is zinc plated. The sheet identifies it as catalog number AB24EG.
Contact for Pricing
Minimum Qty: 15
Multiplier: 15
*Contact for lower quantities*
This is a 16 inch angle brace. It is zinc plated. The sheet identifies it as catalog number AB16EG.
Contact for Pricing
A 2 hole adjustable gusset corner angle angular fitting. It is made of carbon steel with an electro-galvanized finish. The part measures 3-1/2" high by 3-1/2" wide by 2-1/4" deep and has 1/4" thickness. It has one 9/16" hole and one 9/16" x 2-1/2" hole.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
A 1 hole corner angle identified by catalog number CA1H987EG. The sheet states it is zinc plated. It is a 9-7/8 in corner angle used as a hardware component.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Showing 49-60 of 83 results