Showing 13-24 of 83 results
A flat plate fitting made of steel with an electro-galvanized finish. It has 5 mounting holes spaced 9/16 in. on center and a thickness of 1/4 in. The plate type is straight flat plate.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A flat plate fitting with a straight flat plate design. It is made of steel with an electro-galvanized finish. The plate has 2 mounting holes with 9/16 in. mounting hole spacing and a thickness of 1/4 in.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
A 3 hole swivel plate with a zinc plated finish. The sheet identifies it as catalog number SWP3HEG. No additional dimensional or material details are printed on the sheet.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A flat plate fitting with a straight flat plate design. It is made of steel with an electro-galvanized finish. The plate has 4 mounting holes, 9/16 mounting hole spacing, and 1/4 thickness.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 4 hole corner gusset plate with an angular fitting design. It is made of carbon steel with an electro-galvanized finish. The plate measures 5-3/8 in. high by 3-1/2 in. wide and has 4 holes sized 9/16 in. The thickness is 1/4 in.
Contact for Pricing
Minimum Qty: 15
Multiplier: 15
*Contact for lower quantities*
An 18-inch angle brace. It is zinc plated. The sheet identifies it as catalog number AB18EG.
Contact for Pricing
A 4 hole offset bent tee, left hand, with zinc plated finish. It is made of carbon steel and is an angular fitting. The sheet lists dimensions of 3-1/2 in. height, 3-3/4 in. width, 2-1/16 in. depth, and 1/4 in. thickness.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
A 4 hole adjustable gusset corner angle for strut fittings. It is made of carbon steel with an electro-galvanized finish. The part measures 3-1/2" high, 3-1/2" wide, and 2-1/4" deep, with 1/4" thickness. It has two 9/16" holes and two 9/16" x 1-1/2" holes.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
3 Hole Adjustable Corner Angle for strut fittings. It is made of carbon steel with an electro-galvanized finish. The part measures 3-7/8" high, 1-5/8" wide, and 2-5/8" deep, with 1/4" thickness.
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
This is a 12-inch angle brace. It is zinc plated. The sheet identifies it as catalog number AB12EG.
Contact for Pricing
Post base double channel with 4 holes and a square 1-5/8 size. It is zinc plated. The sheet identifies it as catalog number PBD4H162SQEG.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
A 5 hole cross gusset corner angle. It is zinc plated. The sheet identifies it as catalog number CAGX5HEG.
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
Showing 13-24 of 83 results