2 Hole Short Barrel Copper Compression Lug w/ Peep Hole 750 MCM - 1/2" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

The Polaris SP1/0 Set Screw Plug is a replacement part that take the place of the secure removable plugs present in many Polaris pre-insulated connectors. This plug fits connectors sized for 1/0 AWG wires, covering the set screws used to tighten their connections. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection, by guarding the set screws from outside contaminants. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris CP350 Cable Entry Plug is a replacement part that takes the place of the secure removable plugs present in many Polaris pre-insulated connectors. This plug fits ports sized for 350 MCM wires. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris SP350 Set Screw Plug is a replacement part that takes the place of the secure removable plugs present in many Polaris pre-insulated connectors. This plug fits connectors sized for 350 MCM wires, covering the set screws used to tighten their connections. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection, by guarding the set screws from outside contaminants. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris SP500 Set Screw Plug is a replacement part that take the place of the secure removable plugs present in many Polaris pre-insulated connectors. This plug fits connectors sized for 500 MCM wires, covering the set screws used to tighten their connections. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection, by guarding the set screws from outside contaminants. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Use the NSI GBIAL-126-4414 Intersystem Bonding Connector for intersystem bonding of power and communication (phone, cable and satellite) grounding systems. This aluminum bonding connector is dual-rated for copper or aluminum conductors, comes with four circuits and accommodates wires in the range of 2 to 6 AWG. Corrosion-resistant stainless-steel screws hold the wiring in place and a convenient lay-in feature eliminates the need to cut or splice to main electrode, as well as the need to disassemble the ground rod to connection. This intersystem bonding connector is suitable for both indoor and outdoor use and an optional UV-resistant paintable cover is available by adding the suffix –WC for a more attractive appearance. Meets or exceeds requirements set forth in NEC2008 250.94. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The Polaris SP600 Set Screw Plug is a replacement part that take the place of the secure removable plugs present in many Polaris pre-insulated connectors. This plug fits connectors sized for 600 MCM wires, covering the set screws used to tighten their connections. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection, by guarding the set screws from outside contaminants. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Use the NSI GBIAL-126-4414-WC Intersystem Bonding Connector for intersystem bonding of power and communication (phone, cable and satellite) grounding systems. This aluminum bonding connector is dual-rated for copper or aluminum conductors, comes with four circuits and accommodates wires in the range of 2 to 6 AWG. Corrosion-resistant stainless-steel screws hold the wiring in place and a convenient lay-in feature eliminates the need to cut or splice to main electrode as well as disassembling ground rod to connection. This intersystem bonding connector is suitable for both indoor and outdoor use and comes with a UV resistant paintable cover for a more attractive appearance. Meets or exceeds requirements set forth in NEC2008 250.94. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

2 Hole Long Barrel Copper Compression Lug 1/0 AWG - 3/8" Bolt- 3/4" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.

1 Hole Long Barrel Copper Compression Lug with Peep Hole 1/0 AWG - 5/16" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

2 Hole Long Barrel Copper Compression Lug 1/0 AWG - 3/8" Bolt - 1 3/4" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.

2 Hole Long Barrel Peep Hole Copper Compression Lug with Peep Hole 1/0 AWG - 3/8" Bolt - 1 3/4" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.