The Polaris IPLD350-3CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 3 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris CP-600-ISPB Cable Port Cone is a replacement part that takes the place of the secure removable plugs present in many Polaris pre-insulated connectors. This cone fits ports sized for 600 MCM - 12 AWG wires. Protect the interior of your Polaris pre-insulated connectors, each port of which is pre-loaded with an oxide inhibitor to ensure a low-contact resistance connection. Polaris designs connectors for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris IPLD750-4CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 750 - 250 MCM wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris IPLD2/0-3 Multi-Tap Dual-Sided Entry Black Connector features 3 ports sized for 2/0 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The Polaris ITD-1/0CB Multi-Tap Dual-Sided Entry Vision Tap Connector features 2 ports sized for 1/0 - 14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

1 Port Aluminum Lug 250 MCM - 6 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

2 Port Stacked Lug 350 MCM - 6 AWG Stacked Lugs are large size set screw connectors with wire holes stacked on top of each other to minimize the width of the connector. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts (2000V max. per UL486B). UL486A/B Listed. Temperature rating 90 degrees C. Mounting hole spacing is NEMA standard of 1.75".

225A Stacked Neutral Bar, 4-14 AWG 18 Circuits - With Mtg Base

225A Stacked Neutral Bar, 4-14 AWG 42 Circuits & 350 MCM - 6 AWG Main Lug With Mtg Base

The NSI GCA-4 Aluminum Ground Clamp for 250 MCM to 6 AWG Aluminum and Copper Cables grips on water pipes, galvanized pipe or steel conduit between 2-1/2" to 4" IPS pipes. The high-strength extruded aluminum alloy design is plated to provide low-contact resistance and features zinc-plated steel set screws for long-term installation. Use this adjustable clamp to ground copper or aluminum cables to pipes and conduit in indoor environments. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The NSI G-90 Ground Clamp for Rigid Conduit with Flexible Wire Strap, grips on pipes between 1/2" to 1" in diameter and features a 1/2" adapter hub connected to the clamp by a flexible copper strap. The wire strap and adapter both swing 360 degrees, making alignment simple. The copper strap provides additional flexibility during grounding and helps to protect the conduit system from results of vibrations in the water system. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp to attach ground wires from rigid conduit to water pipes in indoor environments. cULus Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The NSI G-25 Heavy Duty Bronze Ground Clamp for Rigid Conduit grips on pipes between 4-1/2" to 6" in diameter and features a 1" adapter hub that swings 360 degrees to make alignment simple. Heavy duty bronze adapters have serrations that match the serrations of the ground clamp, assuring a positive lock. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this interchangeable clamp to attach rigid conduit and ground conductors to water pipes in indoor environments. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.