2 Hole Long Barrel Peep Hole Copper Compression Lug with Peep Hole 2 AWG - 3/8" Bolt - 3/4" Mounting Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.

1 Port Aluminum Lug 2-14 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

Copper Multiple Connector 4-14 AWG 14 Hole Copper multiple connectors are made copper and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper wire only.

Copper Terminal Lug for 8 STR-14 SOL AWG with 1) 3/16" Mounting Hole: Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.

The NSI G-1 Heavy Duty Bronze Ground Clamp for Water Pipe grips on water pipes between 1/2" to 1" in diameter with its serrated body. The zinc-plated steel screws and cast bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp to quickly and easily ground wires to water pipes with the included set screw. Designed for use alone or with heavy-duty bronze adapters. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

The NSI G-66 Bronze Ground Clamp with Wire Adapters grips on pipes between 1-1/4" to 2" in diameter and features a special pressure bar which grips wiring and lessens the chances of grounding conductor being pulled out. The zinc-plated steel screws and bronze clamp body are made of economical, high-quality metals that provide durable performance in a range of applications. Use this clamp with wire adapters for connecting unarmored 4, 6, or 8 STR ground wire to water pipe for grounding. UL Listed 467 for Grounding and Bonding. Stock products you can rely on—stock NSI.

Two-Bolt Bronze Tap Connector 500 - 350 MCM Main and 500 MCM - 4 SOL Tap. Two-bolt bronze tap connectors are made of high strength bronze for heavy duty connections. For use with copper to copper conductors.

Two-Bolt Bronze Tap Connector 4/0 - 2/0 Str Two-bolt bronze plated tap connectors are made of high strength bronze for heavy duty connections. For use with copper, aluminum and steel conductors.

Pre-Insulated Service Entry Sleeves 3/0 - 3/0 AWG Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Pre-Insulated Service Entry Sleeves 3-4 Str - 4 Sol Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Offset Pin Terminal 750 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Mechanical Single-Indent Heavy Duty Lug Crimpers APPLICATIONS: Crimper is a manual compression tool that features an extendable handle design that provides increased leverage and allows crimping up to 500 MCM. Requires no dies. FEATURES: CRIMP CAPACITY: 500 MCM UPC: 662381055095