OM3 24 fiber, Interconnect, Plenum, 24F MPO Female to 24F MPO Female, Method A, Optimized IL, 59 ft, Aqua

OM5 2f 1.6mm PC LSZH PushPull LC/PushPull LC Std Polarity Ult Perf 24m

The PCV-480BY Voltage Marker is rated for indoor use and features excellent adhesive properties when applied to a clean, dry surface. The legend reads, "480 Volts" Vinyl. 4.5" x 1.12" (114.3 mm x 28.44 mm). 1.25" - 3" (31.75 mm - 76.2 mm) compatible pipe diameter. Color Orange. Legend Black. 4 markers per card. 5 cards per package.

Ground bar Clamp 2/0 SOL-250 kcmil

NetKey 2-fiber OS2 LC duplex to LC duplex patch cord, riser (OFNR) rated with 1.6mm jacket, 6m.

The TX6A-28 Cat 6A UTP Patch Cord is a 14-Meter, 0.185-inch (4.7mm) diameter, Red cord constructed of 28 AWG unshielded, twisted pair, solid, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

2 fiber OM4 patch cord, LC push pull to LC push pull, 16mm jacket, riser (OFNR) rated, Ultra IL, 10m

The FiberRunner 6x4 Channel can be used with fittings and brackets to design a routing system to separate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

The CB175-38-L Copper Mechanical Lug is made from high strength electrolytic copper to provide premium electrical and mechanical performance, Wide wire range-taking capability minimizes inventory, Internal pressure bar and V-bottom collar provide uniform clamping force on conductor to assure positive contact between conductor and connector, plated steel set screw provides high strength and durable electrical contact between conductor and connector, cULus Listed for use up to 600 Volts.

This Panduit Basic PDU is tailored for efficient power distribution, featuring (24) C13 and (6) C19 outlets to accommodate a variety of devices. With a robust 32 amp capacity and operating at 230 V in a single-phase system, it ensures reliable power delivery. The unit comes equipped with a secure IEC 60309 2P+E 6h 32A (IP44) input plug, providing a safe and durable connection. A 10-foot (3m) power cord adds to its versatility, allowing for easy installation and setup.

The Cat 6A SF/UTP copper cable is constructed of 24/7AWG stranded copper conductors with HDPE polyethylene insulation. The copper conductors are twisted in pairs and wrapped with a foam polypropylene tape to form a core. All four pairs are surrounded by an overall braided shield and metallic foil and covered with a thermoplastic elastomer (TPE) jacket. The cable is supplied 305 meters (1,000 feet) to a reel and teal.

The TX6000 Cat 6 U/UTP Riser copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant PVC (CMR), Black jacket. Packaged 1000 ft./305m on a reel in a box.