Showing 805-816 of 10,845 results
Contact for Pricing
Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. 15500 Volts ADG series.
Contact for Pricing
Medium Voltage E-Rated Fuse 2750VAC 3A Ferrule, Series: CCB Visual Indicator
Contact for Pricing
Mersen's patented TPMOV® (Thermally Protected Metal Oxide Varistor ) eliminates common destructive failure modes associated with standard MOVs. Comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk inside the TPMOV, the device is securely disconnected in the event of an overvoltage by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open microswitch providing remote indication, if applicable. 270 Volts Micro and Short Leads series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Fuse TRS-R - Class RK5 - Time-Delay 600VAC 300VDC 25A Ferrule SmartSpot® Tri-Onic®
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Fuse TR-R - Class RK5 - Time-Delay 250VAC 160VDC 17.5A Ferrule SmartSpot® Tri-Onic®
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Contact for Pricing
The Surge-Trap® Type 1 XT Series offers Advanced Technology. The XT features TPMOV® technology inside making it the safest product available. With line or load side installation flexibility, this unit is a great fit from the service entrance all the way down to each distribution and/or branch panel. 120/240 Volts split phase system type 200 kA surge rating with alarm .
Contact for Pricing
Contact for Pricing
Fuse Holder UltraSafe™ 750VAC 1000VDC Midget 30A 3-Pole+N Cage Clamp IP20
Contact for Pricing
Contact for Pricing
Showing 805-816 of 10,845 results