Showing 73-84 of 1,783 results
Mersen GPM-A panel mount fuse holders will accommodate 5mm x 20mm fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 6.3 Amps finger grip cap / right angle solder series.
Contact for Pricing
Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type ",P", fuse is used for non-motor loads and Type ",D", for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type ",S", plug fuses are time-delay and tamper resistant. 1500 Volts 3.2 Amps SAG series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*
Mersen GPM panel mount fuse holders will accommodate 5mm x 20mm fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps finger grip cap / solder terminal series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Mersen plug fuses are intended for industrial and residential applications. Non time-delay fuses are available for receptacle and lighting circuits and time-delay fuses for motor loads. For Canadian requirements, a type P fuse is used for non-motor loads and Type D, for electrical heating and cyclical load circuits. Both fuses have low melting-point temperature elements. Type S plug fuses are time-delay and tamper resistant. 125 Volts 15 Amps GP series. 125 Volts 30 Amps GT series.
Contact for Pricing
Minimum Qty: 4
Multiplier: 4
*Contact for lower quantities*
These Premium Amp-trap French Cylindrical Semiconductor Fuses are an extension of the popular A70QS product line. They are solid-fill 14mm and 22mm fuses IEC rated 690VAC, 200kA Interrupting and 700VDC, 100kA interrupting at 10ms time constant. In addition, these fuses have an 890 VDC rating for capacitor discharge applications up to 2.5ms time constant. All ampere ratings are available with a striker. Applications include small inverter drives and UPS systems, with superior I²t for improved protection and performance. 690 Volts 32 amps 22x58 ferrule w/striker.
Contact for Pricing
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 63 Amps 000 gRB D08V series.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*
250V Time Delay Glass 1/4" x 1 1/4" 250V Volts 3 amps GDL-V (pigtail leads) series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
250V Time Delay, Ceramic 1/4" x 1 1/4" 250 Volts 0.8 Amps GSA-V series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
250V Time Delay, Ceramic 1/4" x 1 1/4" 250 Volts 0.2 Amps GSA-V series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
250V Time Delay, Ceramic 1/4" x 1 1/4" 250 Volts 0.25 Amps GSA-V series.
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
FSPDBs introduce a new level of safety and ease for installing power distribution blocks. An IP20 level of finger safe protection is achieved using the FSPDBs and thus eliminates the need for special covers or custom Plexiglas sheets to protect your panels. FSPDBs (sizes 1 to 4) simply snap onto 35mm DIN rail to provide the quickest installation. And since they are modular, you can form any number of poles desired. If multi-pole panel mounting is desired, multiple-pole assembly pins are available. FSPDBs provide a safe, convenient way of splicing cables, splitting primary power into a variety of secondary circuits or providing a fixed junction tap-off point. size 1 cap .
Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
300V 1/2 to 15A Fuse for protection of fluorescent lighting fixtures and ballasts 300 Volts 8 Amps SLR series.
Contact for Pricing
Minimum Qty: 5
Multiplier: 5
*Contact for lower quantities*
Showing 73-84 of 1,783 results