Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors. 15000 Volts XGL series.

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 20 Amps 000 gRB D08 series.

Extremely high breaking capacity fuses:, Protection of power semiconductors as per IEC standard 60269-1 and -4 and EN 60269-1 and -4, 500-690V voltage rating (rating 20 to 400A), gR class (gRB ratings 20 to 125A) according to VDE 636-23, - Clearing all overloads, - Improved safety and protection, - Enabling selective coordination with all fuses, aR class (URB ratings 75 to 400A) according to VDE 636-23 and IEC 60269-4, Two models complying with BS88-4 and EN 60269-4 standards, - Z3 drawing (74 mm between axes) without blown fuse indication - with separate trip-indicator, These fuses are UL Recognized

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 63 Amps 000 gRB D08 series.

500V 5A slow acting 6x32mm fuse link

MC 1-9 FLEX QS 500/640

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. D01

SI 6x32 Fuse Holders For Ferrule-type Fuses 6.3x32 Compliance with IEC 60647-3 Mounting on symmetricl or asymmetrical 35 mm DIN-rail Protection against touching of live parts Protection degree: IP2x for disconnectors (when device is connected and closed) Silver-plated clips with elastic clamping Self-extinguishing material V0-class as per UL94 Padlocking device, blown fuse indication through L.E.D. on request Salt spray-proof version available on request 6x32 clip and clamp clamp with cover.

The Mersen Z1039599 is a high-quality industrial component designed for demanding applications. Engineered for reliability and durability, this product meets stringent performance standards, ensuring optimal operation in harsh environments. Ideal for industrial settings requiring precision and efficiency, the Z1039599 delivers consistent performance and long-term value. Trusted by professionals worldwide, Mersen's commitment to innovation and quality ensures this component exceeds expectations in critical applications.

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type aM NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current. NH0 Separator for Poly .

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 20 Amps 000 gRB D08V series.

690V 32A MODULOSTAR CMS10 3P