The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents. D01

SI 6x32 Fuse Holders For Ferrule-type Fuses 6.3x32 Compliance with IEC 60647-3 Mounting on symmetricl or asymmetrical 35 mm DIN-rail Protection against touching of live parts Protection degree: IP2x for disconnectors (when device is connected and closed) Silver-plated clips with elastic clamping Self-extinguishing material V0-class as per UL94 Padlocking device, blown fuse indication through L.E.D. on request Salt spray-proof version available on request 6x32 clip and clamp clamp with cover.

The Mersen Z1039599 is a high-quality industrial component designed for demanding applications. Engineered for reliability and durability, this product meets stringent performance standards, ensuring optimal operation in harsh environments. Ideal for industrial settings requiring precision and efficiency, the Z1039599 delivers consistent performance and long-term value. Trusted by professionals worldwide, Mersen's commitment to innovation and quality ensures this component exceeds expectations in critical applications.

The NH system is classified among plug-in fuse systems and is composed of: • fuse-base (possibly including terminal covers and phase barriers) • fuse-link with blade contact • fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type aM NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current. NH0 Separator for Poly .

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 20 Amps 000 gRB D08V series.

690V 32A MODULOSTAR CMS10 3P

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 50 Amps 000 gRB D08V series.

The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. The Protistor® gR have been engineered to provide full range protection to eliminate all overloads and semiconductor fault. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I2t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch. 690 Volts 100 Amps 000 gRB D08V series.

250V5SF20A5X20

6,9GRB17D08/80

US22S3P

The Mersen C221009 is a high-quality industrial component designed for demanding applications in various industries. Engineered for reliability and durability, this product ensures optimal performance in harsh environments. With precision manufacturing and rigorous quality standards, the C221009 delivers consistent results, making it an ideal choice for industrial operations requiring dependable components. Its robust construction and advanced engineering provide long-lasting service, reducing downtime and maintenance costs. Trust Mersen's expertise in industrial solutions to enhance your operational efficiency and productivity.