ABB - Low Voltage Drives RDCO-02C-KIT - The RDCO-02 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.
ABB - Low Voltage Drives

RDCO-02C-KIT

Alternate Item Number: 64606956

UPC: 662348077092

Contact for Pricing

Overview

The ABB RDCO-02C-KIT is a vital component for ABB Low Voltage Drives, offering robust fiber optic DDCS channel connectors. This kit provides access to four distinct channels: CH0, CH1, CH2, and CH3, each designed for specific communication tasks. The assignment of these channels is application-dependent, but standard configurations are provided for optimal performance. CH0 is typically utilized for overriding systems, such as fieldbus adapters, operating at a data transfer rate of 5 MBd. CH1 is dedicated to I/O extensions, also functioning at 5 MBd, allowing for expanded input and output capabilities. For synchronized operation, CH2 is designated for Master/Follower links, enabling high-speed communication at 10 MBd. Finally, CH3 is specifically allocated for PC tools, including essential software like DriveWare, facilitating diagnostics and configuration with a data rate of 10 MBd. This structured approach ensures efficient and reliable data exchange within ABB's low voltage drive systems, supporting a wide range of industrial automation and control requirements. The RDCO-02C-KIT is engineered to integrate seamlessly, simplifying the setup process and minimizing wiring complexity for users.
  • Four dedicated DDCS fiber optic channels (CH0-CH3) for drive communication
  • CH0: 5 MBd for overriding systems (e.g., fieldbus adapters)
  • CH1: 5 MBd for I/O extensions
  • CH2: 10 MBd for Master/Follower links
  • CH3: 10 MBd for PC tools (e.g., DriveWare)

Similar Products

RDCO-01C-KIT

RDCO-03C-KIT

RDIO-01-KIT

Voltage Rating: 24…250 VDC or 110…230 VAC

Current Rating: 30 mA

RDNA-01-KIT

You May Also Be Interested In

The RDCO-01 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 10 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 10 MBd. CH3 – PC tools (such as DriveWare) - 10 MBd.

RDCO-01C-KIT

The RDCO-03 module includes the connectors for fiber optic DDCS channels CH0, CH1, CH2 and CH3. The usage of these channels is determined by the application but are normally assigned to the following: CH0 – overriding system (e.g. fieldbus adapter) - 5 MBd. CH1 – I/O extensions - 5MBd. CH2 – Master/Follower link - 5 MBd. CH3 – PC tools (such as DriveWare) - 5 MBd.

RDCO-03C-KIT

The FDCO 02 module includes the connectors for fiber optic DDCS channels CH0 and CH1. The usage of these channels is determined by the application but are normally assigned to the following: CH0 - overriding system (e.g. AC80) - 5 MBd, CH1 - master/follower link - 10 MBd.

FDCO-02

The FDCO 01 module includes the connectors for fiber optic DDCS channels CH0 and CH1. The usage of these channels is determined by the application but are normally assigned to the following: CH0 - overriding system (e.g. AC80M) - 10 MBd, CH1 - master/follower link - 10 MBd.

FDCO-01

Fiber optic communication interface board and CDP312RD panel support. CH 0 - 5Mb - overriding system control (APC2, AC80, Nxxx moodule). CH 1 - 5Mb - is used for DDCS I/O extension. AIMA-01. CH 2 - 10Mb - Master-Follower link (drive-to-drive). CH 3 - 10Mb - PC tool such as DriveWindow. X19 is used for CDP312RD panel.

SDCS-COM-82