Contact for Pricing
Overview
- Front and rear access to 19-inch rack equipment provided by three-part design: door, center section and wall section
- Solid door provides complete physical and visual protection
- Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection
- All seams are fully welded and ground smooth
- Doors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the cabinet
- Premium seamless, foam-in-place gasket prevents contaminants from entering the cabinet
- Key-locking wing knob is included on painted steel cabinet, providing access control to the cabinet; two keys are included with each cabinet
- Stainless steel cabinet is provided with a quarter-turn slotted latch
- One set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted front-to-back, is provided with each center section of the cabinet; additional tapped- or square-hole rack angles can be added to the ca
- On 28-inch (700 mm) wide enclosures, a 4-inch vertical cable manager with composite fingers is provided on hinge side of cabinet
Specifications
Additional Rack Angles | PTRA36T or PTRA36S |
Application | Datacom and Telecom Equipment; Controls and Drives; Networking, Storage and Data Center; Corrosive Environments |
Application | Controls and Drives;Corrosive Environments;Datacom and Telecom Equipment;Networking, Storage and Data Center |
Body Thickness | 1.9 mm |
Body Thickness | 16 ga |
Body Thickness | 14 ga |
Color | Unpainted |
Color | Brushed |
Depth | 380 mm |
Depth | 14.96 |
Depth | 380 |
Door Thickness | 16 ga |
Door Thickness | 1.52 mm |
Door Thickness | 14 ga |
Finish | Brushed #3 |
Height | 922 mm |
Height | 36.3 |
Height | 922 |
Ip Rating | IP4X |
IP Rating | IP66 |
Material | SS304 Stainless Steel |
Material | Stainless Steel;Stainless Steel 304 |
Material | Stainless Steel 304 |
Material | SS304 |
Modification Services | Yes |
Mounting Type | Wall Mounting |
Nema Rating | Type 4, 4X, 12 |
NEMA Rating | 12 Indoor, dust-resistant |
NEMA Rating | 12 |
Nema Rating | Type 4X |
Optional Steel Panel | CP3220 |
Optional Wood Panel | CP3220W |
Product Family | ProTek |
Protection Rating | NEMA Type 12 |
Rack Units | 19 |
Series | ProTek Double-Hinge Solid |
Size | 36.30x23.62x14.96 |
Size | 36.30x23.62x14.96 inches (922 x 600 x 380 mm) |
Type | Data Networking Wall Mounted Cabinets |
Type Number | Type 3R |
Weight | 145 lb |
Width | 23.62 in |
Width | 600 mm |
Package Dimensions (L x W x H) | 30 IN x 28.5 IN x 29.25 IN |
Package Dimensions (L x W x H) | 76.2 cm x 72.39 cm x 74.295 cm |
Package Weight (Imperial) | 145.000 L |
Package Weight (Metric) | 65.772 kg |
ST4803PDGM
Surge-Trap® Surge Protective Device is a no-fuse surge suppressor. The Surge-Trap is a UL 1449 Third Edition compliant modular style surge protective device that is DIN-rail mountable featuring a fail-safe self-protected design, visual indicator and a small foot print. A remote indicator option provides status to critical control circuit. The Surge-Trap provides advanced overvoltage protection utilizing Mersen's patented TPMOV® technology without additional protection devices. 480 Volts 3P Delta system type without N-G mode, with microswitch .
CG43168
This shielded snagless Cat6 cable is perfect for use with our HDBaseT Products or with any other application where long length shielded cable is required. This cable is optimized for superior performance in noisy environments and is designed to handle bandwidth-intensive applications. This cable is designed to meet Cat6 TIA/EIA and ISO/IEC standards for patch cable performance. Each individual pair is bonded together to help maintain the twist-spacing throughout the cable right up to the termination point. The cable design minimizes Near-End Crosstalk (NEXT) levels and features high quality solid conductors, full cable shielding and is terminated with a snagless boot & shielded plug. The combination of the shielded plug, shielded cable, snagless boot and solid conductors provides superior performance over standard stranded conductor patch cables when used with HDBaseT solutions. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male Features * HDBaseT Certified * 4- pair solid conductor construction * Overall cable shield and shielded connectors * Snagless connector design
3085
Super-Safeway® Multiple Outlet Box, Extended Depth, 2-Sided, F2 (1/2") Cord Grip Body, with Flip Lids for (2) Duplex Not Included
STP6X12MIG
This TX6A 10Gig Cat 6A STP Patch Cord is a 12-Meter, Int'l Grey cord constructed of 26 AWG, shielded, twisted pair, stranded, CM/LSZH cable and with high-performance modular plugs. Its tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. The slender strain relief boot provides easy access in high-density applications. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.
F62ERLNSNSNM002
OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL
CESUM3-C15
Membrane plate cable entry system offers a good strain relief while maintaining IP/NEMA ingress sealing rating. The CESUM3-C15 is a Rectangular Un-Terminated Cable Entry System, 4.1" (103 mm) Long, with 8 Openings 0.12" (3.0 mm) to 0.31" (8 mm), 3 Openings 0.20" (5.1 mm) to 0.35" (9.0 mm), 4 Openings 0.3" (7.5 mm) to 0.47" (12.0 mm). Color is Black. Standard Package Quantity is 1 PC.
How to Install the PTHS362415X Controller
This guide provides step-by-step instructions for installing and configuring the PTHS362415X Controller on a DIN rail.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the PTHS362415X Controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the power supply
Using wire strippers, prepare the power supply wires and connect them to the designated terminals on the controller. Ensure correct polarity and secure the connections with terminal connectors.
- Verify connections
Use a multimeter to check the voltage at the power terminals of the controller. Ensure the voltage is within the specified range before proceeding.
- Configure the controller settings
Access the controller's configuration interface and input the necessary parameters as per your application requirements. Save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate performance. Adjust settings as necessary based on the calibration results.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.