Woodhead 67W82 - Watertite® Receptacle with Locking Blade, Single Flip Coverplate, 4 Pole/5 Wire, NEMA L22-20, 3ø 480V
Woodhead

67W82

Alternate Item Number: 1301470153

UPC: 786788715731

Documents & Media
Technical DrawingSpecification Sheet

Contact for Pricing

Overview

The Woodhead Watertite® Receptacle with Locking Blade (SKU: 67W82) is a rugged, 4-pole/5-wire NEMA L22-20 locking receptacle rated for 480V three-phase power, designed for wet and demanding industrial environments. Engineered for continuous operation in locations exposed to moisture, dust, and corrosive elements, this receptacle meets NEMA 4X, 6, and 6P ratings and IEC IP67 standards, ensuring resistance to high-pressure washdowns up to 1000psi. The single flip coverplate provides quick access while sealing out contaminants when closed, protecting internal contacts from environmental damage. The locking blade mechanism delivers a secure, vibration-resistant connection, preventing accidental disconnections in high-vibration applications such as heavy machinery, portable equipment, and automated manufacturing systems. The F3 body size (¾" diameter) features nickel-plated brass blades and contacts, NEo-TEX® Paracril OZO rubber housing, stainless steel face screws, and a Lexan® coverplate for durability and chemical resistance. Color-coded ¼" terminal screws (preset open) accept straight blade, Phillips, or square-drive drivers, while a transparent wiring guide ensures proper strand alignment before tightening. The captive tri-drive speed screws enable tool-free assembly and long-term reliability. With an operating temperature range of -40°C to 75°C and a maximum 30°C temperature rise at full rated current, the 67W82 is ideal for food processing, chemical plants, outdoor construction sites, and industrial automation systems requiring dependable, high-voltage power distribution. Trusted for decades in critical applications, Woodhead’s Watertite® series combines industrial-grade construction with NSF/ANSI/3-A 14159-1 certification for washdown environments.
  • NEMA L22-20 configuration, 4-pole/5-wire, 480V 3-phase rated
  • IP67 and NEMA 4X/6/6P certified for wet/dusty environments, resists 1000psi washdown
  • Single flip coverplate with Lexan® material for contamination protection
  • Locking blade mechanism prevents accidental disconnections in high-vibration applications
  • F3 body size (¾" diameter) with nickel-plated brass contacts and stainless steel hardware
  • Operating temperature: -40°C to 75°C; UL File No. E68122, CSA LR6837, NSF/ANSI/3-A 14159-1

Specifications

Amperage Rating
20 A
Brand Name
Woodhead
Environmental Conditions
IP67
Number Of Poles
4-pole/5-wire
Number of Poles
4;5-wire
Sub Brand
Watertite
Type
Receptacle
Voltage Rating
3Ø 480V
Package Weight (Imperial)
1.000 L
Package Weight (Metric)
0.454 kg
600T Modified for Switchboard Users

600T-MOD

600T Modified for Switchboard Users
Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack

SP279

Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack
One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B118A

One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B232ACP

Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic

A414

One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic
One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic

SC100RR

One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic
One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic

SC100ADJC

One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic
Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.

PH10-38R-E

Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.
One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic

A410R-CAR

One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD350-6

The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A

Frequently Asked Questions about Woodhead

What certifications and standards do Woodhead products comply with?

Woodhead products are certified to multiple rigorous industrial standards, including UL Listed, CSA Certified, NSF Certified, and IP69K Rated. Their wiring devices meet FDA compliance requirements for food-related applications, and are tested to international standards like JIS Z2801/ISO 22196 for antimicrobial performance. These certifications demonstrate Woodhead's commitment to safety, durability, and quality across industrial, food processing, and harsh environment applications.

What industries and applications are Woodhead products used for?

Woodhead products serve a wide range of industrial applications including manufacturing, construction sites, food and beverage processing, shipyards, utility plants, and maintenance operations. Their specialized wiring devices and outlet boxes are designed for harsh environments like wet locations, petrochemical facilities, and heavy-duty industrial settings, with specific product lines for assembly stations, workstations, and portable power needs.

What are the key features of Woodhead products?

Woodhead products feature advanced industrial-grade design with key capabilities including IP69K water resistance, FDA-compliant materials, antimicrobial silicone rubber construction, and UL/CSA certifications. Their product lines span wet-location wiring devices, heavy-duty industrial connectors, portable lighting, and control solutions engineered for extreme environments like food processing, petrochemical, and manufacturing applications.

What are the main product lines offered by Woodhead?

Woodhead offers a comprehensive range of industrial connectivity solutions, including circular connectors, cordsets, and connectivity products for automation and industrial environments. Their product lines cover multiple series such as the 29W, 35, 32G, and 1000-series connectors, which are designed for robust industrial applications with various configurations and specifications.

What communication protocols do Woodhead products support?

Woodhead products support a comprehensive range of industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, CANopen, and DeviceNet. These protocols enable flexible connectivity across multiple industrial automation platforms, supporting high-speed data transmission and seamless network integration for diverse industrial applications.