Woodhead 65W04DPLX - Watertite® Receptacle with Duplex Flip Coverplates with Locking Blade, 2 Pole/2 Wire, NEMA 1-15, 125V
Woodhead

65W04DPLX

Alternate Item Number: 1301460144

UPC: 786788714406

Documents & Media
Specification Sheet

Contact for Pricing

Overview

The Woodhead Watertite® Receptacle (SKU: 65W04DPLX) is a rugged, industrial-grade electrical receptacle designed for wet and harsh environments where moisture, dust, and contaminants pose risks to equipment and personnel. Rated for 125V operation with a 2-pole, 2-wire configuration, this NEMA 1-15 receptacle meets stringent safety and performance standards for use in manufacturing plants, construction sites, warehouses, and outdoor installations. The integrated duplex flip coverplates provide dual protection: they shield the receptacle from environmental contaminants when not in use and allow tool-free access when needed, reducing downtime in high-traffic areas. Key features include a locking blade mechanism that prevents accidental disconnections and tampering, ensuring secure power delivery in high-vibration or high-impact settings. The receptacle’s floating blade construction aligns plugs automatically for a better mechanical and electrical connection, minimizing wear and heat generation. Color-coded ¼-inch terminal screws are preset in the open position for quick, error-free wiring, and tri-drive terminals accommodate straight blade, Phillips, and square-drive screwdrivers for versatility. A transparent wiring guide verifies wire strand placement before securing, while a three-piece strain relief system seals cords without damage. Constructed with nickel-plated brass blades and contacts, a NEo-TEX® Paracril OZO rubber outer housing, and stainless steel face screws, the 65W04DPLX is built to withstand high-pressure washdowns up to 1000psi and resist corrosion. The Lexan® coverplate and closure caps provide impact resistance and durability, while the F2 body size (1.56 inches) ensures compatibility with standard outlet boxes and NEMA 5-15 or 5-20 configurations. Backed by UL File No. E68122 and CSA File No. LR6837 certifications, this receptacle is NSF/ANSI/3-A 14159-1 compliant for food processing and sanitary environments. Choose the 65W04DPLX for a reliable, long-lasting solution in wet locations, temporary power setups, or permanent industrial installations.
  • NEMA 1-15 rated for 125V, 2-pole/2-wire configuration
  • Duplex flip coverplates for dust, moisture, and debris protection
  • Locking blade mechanism prevents accidental disconnections
  • Floating blade construction minimizes wear and heat generation
  • Tri-drive terminals and transparent wiring guide for easy installation

Specifications

Amperage Rating
15 A
Brand Name
Woodhead
Connection Type
Screw Terminal
Environmental Conditions
IP67
Ip Rating
IP66/IP67
Material
Poly
Mounting Type
Surface Mount
Nema Rating
NEMA 1-15
Nema Rating
1-15
Number of Poles
2;2-wire
Number Of Poles
2-pole/2-wire
Poles
2P/2W
Series
Watertite
Size
39.62mm (1.56")
Sub Brand
Watertite
Type
Receptacle
Voltage Rating
125 V
Package Weight (Imperial)
1.000 L
Package Weight (Metric)
0.454 kg
600T Modified for Switchboard Users

600T-MOD

600T Modified for Switchboard Users
Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack

SP279

Wall Plate Screw, #6-32 size, Oval head, 1 in. length, White head color, Slotted drive type, Steel, Zinc Plated finish, 100 per pack
One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B118A

One-Gang Nail-On New Work Outlet Box, Volume 18 Cubic Inches, Length 3-3/4 Inches, Width 2-1/4 Inches, Depth 2-7/8 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails

B232ACP

Two-Gang Nail-On New Work Outlet Box, Volume 32 Cubic Inches, Length 3-3/4 Inches, Width 4 Inches, Depth 3 Inches, Color Blue, Material PVC, Mounting Means Captive Nails
One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic

A414

One-Gang Box Cover, Volume 8.1 Cubic Inches, 4 Inches Square, Raised 1-1/4 Inch, Color Blue, Material Non-Metallic
One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic

SC100RR

One-Gang Low-Voltage Old Work Bracket, Length 4.32 Inches, Width 2.52 Inches, Depth 1.66 Inches, Color Orange, Material Non-Metallic
One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic

SC100ADJC

One-Gang Low-Voltage Adjustable Bracket, Color Orange, Material Non-Metallic
Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.

PH10-38R-E

Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.
One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic

A410R-CAR

One-Gang Box Cover, Volume 3.5 Cubic Inches, 4 Inches Square, Raised 1/2 Inch, Color Blue, Material Non-Metallic
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD350-6

The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A

Frequently Asked Questions about Woodhead

What certifications and standards do Woodhead products comply with?

Woodhead products are certified to multiple rigorous industrial standards, including UL Listed, CSA Certified, NSF Certified, and IP69K Rated. Their wiring devices meet FDA compliance requirements for food-related applications, and are tested to international standards like JIS Z2801/ISO 22196 for antimicrobial performance. These certifications demonstrate Woodhead's commitment to safety, durability, and quality across industrial, food processing, and harsh environment applications.

What industries and applications are Woodhead products used for?

Woodhead products serve a wide range of industrial applications including manufacturing, construction sites, food and beverage processing, shipyards, utility plants, and maintenance operations. Their specialized wiring devices and outlet boxes are designed for harsh environments like wet locations, petrochemical facilities, and heavy-duty industrial settings, with specific product lines for assembly stations, workstations, and portable power needs.

What are the key features of Woodhead products?

Woodhead products feature advanced industrial-grade design with key capabilities including IP69K water resistance, FDA-compliant materials, antimicrobial silicone rubber construction, and UL/CSA certifications. Their product lines span wet-location wiring devices, heavy-duty industrial connectors, portable lighting, and control solutions engineered for extreme environments like food processing, petrochemical, and manufacturing applications.

What are the main product lines offered by Woodhead?

Woodhead offers a comprehensive range of industrial connectivity solutions, including circular connectors, cordsets, and connectivity products for automation and industrial environments. Their product lines cover multiple series such as the 29W, 35, 32G, and 1000-series connectors, which are designed for robust industrial applications with various configurations and specifications.

What communication protocols do Woodhead products support?

Woodhead products support a comprehensive range of industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, CANopen, and DeviceNet. These protocols enable flexible connectivity across multiple industrial automation platforms, supporting high-speed data transmission and seamless network integration for diverse industrial applications.