Contact for Pricing
Overview
- High-conductivity copper construction for optimal current transfer
- Peep hole for easy inspection of cable insertion depth
- Tin-plated for corrosion resistance and low contact resistance
- cULus 486A/B and UL467 listed (6 AWG - 3/0 AWG sizes)
- Rated 600V, 90°C temperature rating, suitable for 35KV max applications
Specifications
Application | Terminate, Splice, Tap Power Connectors |
Cable Size | # 4 AWG (STR) |
Color | Gray |
Environmental Conditions | 90 C |
Finish | Tin Plated |
Material | Copper |
Mounting | 1/2 Mounting Holes IN |
Number Of Holes | 2 |
Size | L=4.09 - W=.870 - OD=.340 - ID=.250 IN |
Special Features | # 4 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing |
Standard | UL486A/B, UL467 (8 AWG -3/0 AWG) |
Stud Size | 1/2 IN |
Type | Long Barrel - Two Hole With Peep Hole |
Voltage Rating | 600 V |
Warranty | 1 Year |
Package Dimensions (L x W x H) | 4.09 IN x 0.87 IN x 0.34 IN |
Package Dimensions (L x W x H) | 10.3886 cm x 22.098 mm x 8.636 mm |
Package Weight (Imperial) | 2.800 L |
Package Weight (Metric) | 1.270 kg |
L4N-14
2 Hole Long Barrel Copper Compression Lug 4 AWG - 1/4" Bolt - 1" Mounting Hole Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
L4N
2 Hole Long Barrel Copper Compression Lug 4 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
GL4N-141
2 Hole Short Barrel Copper Compression Lug w/ Peep Hole 4 AWG - 1/4" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
L410
1 Hole Long Barrel Copper Compression Lug 4 AWG - 10 Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
AL4-14
1 HoleStandard BarrelAluminum Compression Lug4 AWG - 1/4 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
AL4-38
1 HoleStandard BarrelAluminum Compression Lug4 AWG -3/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
SC-4
StandardBarrel TinnedCopperSplice4 AWG Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
C-4
Long Barrel TinnedCopperSplice4 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
SC-3
StandardBarrel TinnedCopperSplice3 AWG Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
SC-600
StandardBarrel TinnedCopperSplice600MCM Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.How to Install NSI Copper Compression Connectors
Install NSI copper compression lugs or splices on concentric, compressed, or compact copper conductors. This guide covers conductor preparation, connector selection, and crimping with approved tools and dies.
Tools needed:
Wire stripper, Wire brush, Approved compression crimp tool, Approved dies or dieless crimp tool (as applicable)
Supplies needed:
NSI copper compression lug or splice sized for the conductor, Copper conductor cable, Approved connector barrel markings/reference chart
- Select the correct connector and tool
Choose an NSI lug or splice that matches the conductor size and application. Verify the connector series, barrel length, and approved crimp tool/die combination from the chart before starting. Use only approved tools and dies for the connector type.
- Strip the conductor insulation
Carefully strip the insulation from the conductor without nicking the strands. Strip enough insulation so the conductor can be fully inserted into the connector barrel and completely fill it. Wear appropriate PPE and keep the conductor de-energized before handling.
- Clean the stripped conductor
Wire brush the stripped portion of the conductor to remove oxide films and contamination. Make sure the exposed copper is clean before crimping, because poor surface preparation can reduce the quality of the connection.
- Insert the conductor fully into the connector
Insert the cleaned conductor completely into the connector barrel until it bottoms out. Confirm that the stripped portion is fully seated and that no insulation is trapped inside the barrel.
- Crimp the connector at the marked locations
Crimp the connector using the approved NSI tool and die set. Follow the barrel markings for suggested crimp locations, and apply the required number of crimps for the connector series. For long-barrel lugs and splices, perform twice the number of crimps shown in the chart.
- Verify the finished connection
Inspect the completed crimp to confirm the conductor is secure, fully inserted, and properly compressed. Check that the connector matches the conductor size and that the crimp locations were followed correctly before placing the assembly into service.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.