Contact for Pricing
Overview
- Constructed from high-conductivity copper tubing for superior performance.
- Tin-plated for enhanced corrosion resistance and durability.
- Long barrel design with serrations for secure crimping and proper tool indication.
- Color-coded (Pink) and marked with die index for easy identification.
- UL486A Listed and UL467 Listed for grounding/bonding (8-3/0 AWG); rated up to 35KV when properly installed.
Specifications
Application | Terminate, Splice, Tap Power Connectors |
Color | Pink |
Conductor Range | 1/0 AWG (STR) |
Environmental Conditions | 90 C |
Finish | Tin Plated |
Material | Copper |
Number Of Conductors | 2 |
Number Of Poles | 1 |
Size | L=2.20 - OD=.519 - ID=.389 |
Special Features | 1/0 AWG (STR) - CU Splice |
Standard | UL486A/B, UL467 (8 AWG -3/0 AWG) |
Temperature Rating | 90 C |
Type | Long Barrel - CU Splice |
Voltage Rating | 600 V |
Warranty | 1 Year |
Package Dimensions (L x W x H) | 2.201 IN x 0.39 IN x 0.39 IN |
Package Dimensions (L x W x H) | 5.5905 cm x 9.906 mm x 9.906 mm |
Package Weight (Imperial) | 5.500 L |
Package Weight (Metric) | 2.495 kg |
SC-1/0
StandardBarrel TinnedCopperSplice1/0 AWG Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
ASC1/0T
Dual Rated Aluminum Splice 1/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
PTS1/0
Solid Pin Terminal for Copper and Aluminum Conductors 1/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.PT1/0
Stranded Bi-Metallic Pin Terminal 1/0 AWG Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.
PT400
Stranded Bi-Metallic Pin Terminal 400 MCM Stranded Bi-Metallic Pin Terminal designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.
PTO-400
Offset Pin Terminal 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
ASC2T
Dual Rated Aluminum Splice 2 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
PTS400
Solid Pin Terminal for Copper and Aluminum Conductors 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PTO-500
Offset Pin Terminal 500 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PTS500
Solid Pin Terminal for Copper and Aluminum Conductors 500 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.L1056
1 Hole Long Barrel Copper Compression Lug 1/0 AWG - 5/16" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
GL1038
1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 1/0 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.How to Install Copper Compression Connectors
Install NSI copper compression lugs or splices on copper conductors by selecting the correct connector, preparing the wire, and crimping with the approved tool and die set. Follow the strip-length and crimp-location guidance to ensure a secure, UL-approved connection.
Estimated time: 15m
Tools needed:
Wire stripper, Wire brush, Approved crimp tool or compression tool, Approved dies for the selected connector series
Supplies needed:
Correct NSI copper compression lug or splice connector, Copper conductor cable, Optional anti-oxide cleaning materials if required by site practice
- Select the correct connector
Choose the proper NSI lug or splice for the conductor size and series being installed. Verify that the connector matches the cable size and that the tool/die combination is approved for the connector series before starting.
- Strip and clean the conductor
Carefully strip the insulation to the specified length without nicking or damaging the strands. Wire brush the stripped conductor to remove oxide films, and keep the exposed copper clean before insertion. Warning: Do not use a conductor with damaged strands or contamination.
- Insert the conductor fully
Insert the stripped conductor completely into the connector barrel so the conductor fills the barrel fully. Verify that the wire is seated all the way in and that no insulation is trapped inside the connector.
- Crimp the connector
Use the approved mechanical crimp tool and the correct die set for the connector series and wire size. Make the required number of crimps at the manufacturer-suggested barrel markings; long-barrel connectors require twice the number of crimps shown in the table. Warning: Use only certified UL-approved tools and dies for the listed connector.
- Inspect the finished connection
Check that the crimp is properly formed, the connector is secure, and the conductor cannot be pulled out by hand. Confirm the installation matches the required strip length and crimp count for the selected connector size and series.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.