Contact for Pricing
Overview
- Constructed from high conductivity aluminum tubing for optimal electrical performance.
- Features a center stop to ensure proper and consistent cable installation.
- Electro-tin plated for superior corrosion resistance and extended service life.
- Color-coded and marked with die index information for easy identification.
- Pre-filled with oxide inhibitor and capped for connection integrity.
Specifications
Application | Terminate, Splice, Tap Power Connectors |
Color | Green |
Conductor Range | 400 MCM (STR) |
Connection Type | Compression |
Environmental Conditions | 90 C |
Finish | Tin Plated Bronze |
Material | Aluminum |
Number Of Conductors | 2 |
Number Of Poles | 1 |
Size | L=4.87 - OD=1.19 - ID=.759 |
Size | 400 MCM |
Special Features | 400 MCM (STR) - ALCU Splice |
Standard | UL486A/B |
Temperature Rating | 90 C |
Type | Standard Barrel - ALCU Splice |
Voltage Rating | 600 V |
Warranty | 1 Year |
Package Dimensions (L x W x H) | 4.878 IN x 1.19 IN x 1.19 IN |
Package Dimensions (L x W x H) | 12.3901 cm x 3.0226 cm x 3.0226 cm |
Package Weight (Imperial) | 2.100 L |
Package Weight (Metric) | 0.953 kg |
PTO-400
Offset Pin Terminal 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
PTS400
Solid Pin Terminal for Copper and Aluminum Conductors 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
C-400
Long Barrel TinnedCopperSplice400 MCM Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
PT400
Stranded Bi-Metallic Pin Terminal 400 MCM Stranded Bi-Metallic Pin Terminal designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.
SC-400
StandardBarrel TinnedCopperSplice400MCM Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
ASC4T
Dual Rated Aluminum Splice 4 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
ASC2/0T
Dual Rated Aluminum Splice 2/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
PTS6
Solid Pin Terminal for Copper and Aluminum Conductors 6 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
ASC3/0T
Dual Rated Aluminum Splice 3/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
ASC600T
Dual Rated Aluminum Splice 600 MCM Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
ASC6T
Dual Rated Aluminum Splice 6 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
ASC1000T
Dual Rated Aluminum Splice 1000 MCM Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.How to Install and Crimp an ASC400T Aluminum Compression Connector
Install the correct ASC400T aluminum compression connector on a compatible conductor, prepare the wire properly, and crimp it to the manufacturer’s specifications. Follow the strip-length and crimp-location guidance to ensure a secure, code-compliant connection.
Tools needed:
Wire stripper, Wire brush, Approved crimp tool (NSI N12ID dieless crimp tool or compatible UL-approved tool, die set as required by the connector series)
Supplies needed:
ASC-T series aluminum compression connector, Compatible conductor sized to the connector chart, Oxide-free cleaned conductor end
- Select the correct connector size
Choose the proper ASC-T lug or splice connector for the conductor size you are installing. Verify that the wire range, color code, and strip length match the chart before starting. Do not use a connector that does not match the cable size.
- Strip the conductor to the specified length
Carefully strip the insulation from the conductor without nicking or damaging the strands. Strip only enough so the conductor can be completely inserted into the connector barrel and fill it fully. Use the strip length listed for the selected wire size.
- Clean the stripped conductor
Wire brush the stripped portion of the conductor to remove any oxide film. Make sure the exposed conductor is clean before insertion, since contamination can reduce connection quality and conductivity.
- Insert the conductor fully into the barrel
Insert the cleaned conductor completely into the connector barrel until it is fully seated. Confirm that the stripped portion is completely inside the barrel and that no bare conductor is left exposed beyond the connector.
- Crimp the connector at the marked locations
Use the approved crimp tool and apply the number of crimps specified for the connector series and wire size. Follow the barrel markings for suggested crimp locations when using NSI N12ID and N1240 tools. For splice connectors, apply the required number of crimps per side.
- Verify the finished connection
Inspect the completed crimp to confirm the connector is secure, properly aligned, and fully compressed. Ensure the conductor cannot be pulled out and that the installation matches the manufacturer’s crimp and tool requirements.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.